How To Fix Jet Ski Hull Scratches?

jet-ski-scratches

Jet skis are more than just a means to get out on the water. It's a lifestyle. After you have made a significant investment in this lifestyle, A scratch on your hull can cause serious problems. There are some good things you can do to repair these scratches on your own.

Your jet ski can be repaired quickly and easily if you have the right information. These are the essential tips for jet ski hull repair. Lets get started.

A Short Guide to Jet Ski Hull Scratches


Let's discuss the basics before you jump on that jet ski. Most jet ski hulls are made from fiberglass. You may be
familiar after working out the kinks in an RV or automobile. Fiberglass is a durable and strong material, but as anyone who’s
repaired it before will understand, it does require a bit of finesse when it comes to buffing out scratches. 

Fiberglass is strong and durable. However, as anyone who has used it knows, fiberglass can be damaged easily. It is a skill that can only be learned from those who have done it before. This is where you can buff out scratches.


It is also important to know the gel coating on your hull. This is the hard resin layer on the fiberglass exterior that seals it. Finish the hull. Sometimes, you will need to work with for scratch-level repairs. This gel coat can be damaged if you attempt to repair it (e.g. sanding). The gel coat must be replaced before you can move on.

Steps to How to Repair a Jet Ski Hull Scratch

boat_cleaner__96882.1377245989.386.513

What are the best ways to get a scratch from your jet ski? You can also invest in a gelcoat repair kit. Do the following steps:

  • Diagnose How deep is the problem?
    It's possible to change a hull with a few dings.
    You may need to hire someone for more labor-intensive repairs.
    However, most jet skiers are able to deal with surface-level scratches.
  • Clean!
    Clear the debris. Even if your jet ski doesn't seem to be particularly damaged, you should clean it.
    You don't want it to look dirty. You might need to scratch things that are harder to see. The key to giving your jet ski a smooth
    finish is by being thorough with every step.
  • Sand DowThe area
    This will remove the gel coat, so be aware of what you’re doing—and that you’ll need gel coat repair to touch up the area once you’re finished. Again, the key here is smooth consistency. 
  • Replace the gel coat
    Follow the instructions on your gel coat repair kit.
  • Once you have the After the gel coat has dried to consistency, you can apply a layer
    LifeWax will give the spot the protection it deserves. It might be a good idea to group your jet together.
    Do a complete cleaning of all Jet skis and "chores". Consistency is the best.



Jet Skis: Stock up Cleaning & Maintenance Products

lifewax__65158.1377245962.220.290
A jet ski hull should be a pristine thing. If it gets scratches or dirty it is no the worse thing in the worldIt doesn't need to be the end. Simply understand what it is. Just understand how to repair your jet ski hull scratches and who you should contact. To best approach each layer, you should be patient. Don't forget about investing in a few jet-friendly maintenance products that are available along the way!


Visit Our:

Inventory Parts Services | Contact Us